Lasercuttingspace

Our previous tutorial talked about "the effect of power on the cutting effect" and learned that the greater the power, the greater the energy and the deeper the cut. But today, the little expert brings you another factor that affects the cutting effect - speed. The theme of this issue: Laser Cutting Advanced Tutorial 02 - The effect of speed on cutting effect List of items: laser machine  : Nova 35 (80W) laser soft:  RD works Glued wood board: 3mm parameter settings: Cutting speed: 20mm/s Cutting power: 1%, 10%, 50%, 70% Cutting focal length: 6mm Whether to blow: weak blowing Comparison of effects: When it comes to speed, perhaps many people don't know what the speed change is. They don't know whether the speed of the speed directly affects the good or bad of the cutting effect. Let's compare and analyze the speed change through the cutting effect. Comparison of different speeds It can be seen that when we change the speed wi

Hello friends, The first issue of this blog is Laser Cutting Advanced Tutorial 01: Power impact on cutting.The main content is to introduce the effect of different power on cutting, mainly in visual effects. List of items: laser machine  : Nova 35 (80W) laser soft:  RD works Glued wood board: 3mm parameter settings: Cutting speed: 20mm/s Cutting power: 1%, 10%, 50%, 70% Cutting focal length: 6mm Whether to blow: weak blowing Comparison effect : We can first see the effect of the cut: In the picture, the depth of the horizontal lines cut by the lasers of different powers on the wooden blocks is obviously different. At constant speed, change the amount of power to see the effect. We can see that the depth of the cut will gradually increase as the power increases. When the power is 1% and 10%, it can be seen that the cut on the block is relatively shallow. When the power is increased to 50% and 70%, the cut marks of the wood block become deeper

Hello everyone, I am a laser technology enthusiast and I am very happy to come to bloger. The purpose of writing these blogs is twofold. The first point is that through these blogs, I grow up, grow my knowledge, learn more knowledge, and then I can use what I have learned in the future. The second point is for readers. The person who watches my blog is actually lucky, because I am a beginner, readers and friends can progress with me, discuss together, make progress together, achieve mutual benefit, and hope that the blog content I write can help some in laser cutting A friend who has problems with the machine. In this blog, I mainly send some good works about laser cutting machine, including process, design drawing resources and various parameter settings. If you find out what is wrong or not enough here, please understand. You can comment in time to warn me, I will adopt the correction, I will continue to improve my blog forum. I hope you come often, thank you!