Advanced Laser Engraving Tutorial 01—The Effect of Speed on Engraving

Ready to work:

Tool: Laser cutting machine (80W)
Glued wood: 3mm
parameter settings:
Engraving power: 15%
Engraving interval: 0.08
Whether to blow: weak blow
Focal length: 6mm


The effect of the above picture is very obvious. When other parameters are the same when we are sculpting, the faster the speed, the lighter the sculpting effect, the less obvious the yellowing effect, and the shorter the time it is used, that is In the case, when we set the speed to the maximum, the work efficiency will be faster.






On the contrary, when our engraving speed is smaller, the longer the engraving time is, the yellowing phenomenon becomes more serious, so the effect of engraving will be deeper.

in conclusion:

We also draw a conclusion: the faster the speed, the shallower the engraving effect, and the higher the efficiency; on the contrary, the slower the speed, the deeper the engraving effect, and the lower the efficiency.

When the speed is constant at the highest, it is an effective method to improve the engraving efficiency. The depth of the engraving is adjusted by power.







Comments

Post a Comment

Popular posts from this blog

Laser Cutting Advanced Tutorial 08 - Paper Cutting Tips

Image
This issue: Laser Cutting Advanced Tutorial 08 - Paper Cutting Tips Tool material: Laser cutting machine : Thunderlaser Nova 35 (80watt) Hard cardboard and A4 paper represent several sheets of soft paper parameter settings: Cutting speed: 350mm/s Cutting power: 15% - 35% Cutting focal length: 6mm Whether to blow: strong blowing When laser cutting paper, you need to pay attention to the choice of materials and the setting of parameters. Let's analyze it briefly. Comparison of effects: 1. Material selection The choice of materials is especially important when cutting paper with a laser. We have selected two very different types of paper, one is A4 paper represented by softness, rice paper, and the other is paper represented by hard cardboard. After experimental testing, we can see that the effect of cutting two kinds of paper is also very different. Why? Let me explain each one below. The effect of the soft texture paper represented by A4 paper It c
Read more

Advanced Laser Engraving Tutorial 03-The effect of speed on sculpting

Image
Item list: Machine: Laser engraving machine (80W) Glued wood: 3mm parameter settings: Engraving power: 15% Engraving interval: 0.08 Whether to blow: weak blow Focal length: 6mm The effect of the above picture is very obvious. When other parameters are the same when we are sculpting, the faster the speed, the lighter the sculpting effect, the less obvious the yellowing effect, and the shorter the time it is used, that is In the case, when we set the speed to the maximum, the work efficiency will be faster. On the contrary, when our engraving speed is smaller, the longer the engraving time is, the yellowing phenomenon becomes more serious, so the effect of engraving will be deeper. in conclusion: We also draw a conclusion: the faster the speed, the shallower the engraving effect, and the higher the efficiency; on the contrary, the slower the speed, the deeper the engraving effect, and the lower the efficiency. When the speed is constant at the h
Read more